Hi All,

I am facing some issues while installing gimp2.6. See below log

checking for _NL_MEASUREMENT_MEASUREMENT... yes checking whether NLS is requested... yes checking for intltool >= 0.35.5... ./configure: line 23764: intltool-update: command not found found
configure: error: Your intltool is too old. You need intltool 0.35.5 or later.

Then i tried to install intltool-0.40.5, some perl issue i am facing see below log messages

checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk
checking whether make sets $(MAKE)... yes checking for perl... /usr/local/bin/perl checking for XML::Parser... configure: error: XML::Parser perl module is required for intltool

Please let me know any comments .

Regards, Sanjeev

Hi Martin,

I am working on Linux platform ( Fedora 6).

-Sanjeev

sanju More wrote:

Hi All,

I am facing some issues while installing gimp2.6. See below log

[...]

Hi

What platform are you on? I think I got that problem when I went through the process of building GIMP on Windows. I ended up getting using a prebuilt version I got from another developer.

In anycase, just make sure the XML::Parser module is available, that should fix your problem.

- Martin

Hi,

It is installed, please let me know how to check that is installed.

-Sanjeev

----- Original Message ---- From: Daniel Hornung
To: gimp-developer@lists.xcf.berkeley.edu Sent: Saturday, 17 January, 2009 5:09:35 PM Subject: Re: [Gimp-developer] Gimp2.6 Install issue

On Saturday 17 January 2009, sanju More wrote:

checking for perl... /usr/local/bin/perl checking for XML::Parser... configure: error: XML::Parser perl module is required for intltool

Well, is the Perl xml parser installed?

Daniel

Hi,

I want to know is it possible to port Gimp2.6.4 Arm processor. i downloaded the Gimp2.6.4 source code and i want build this for ARM processor. Is it possible to port this to arm processor?

- Sanjeev

----- Original Message ---- From: Kevin Cozens
To: gimp-developer
Sent: Saturday, 17 January, 2009 9:21:33 PM Subject: Re: [Gimp-developer] Gimp2.6 Install issue

sanju More wrote:

I am working on Linux platform ( Fedora 6).

When I was first going through my e-mail I read the above as Fedora 8. If you are using a Fedora which is that old you will soon discover that a lot more packages than just XML::Parser are missing or out-of-date on your system.

If you are having trouble handling the missing(?) XML::Parser package, getting updated glib, gtk+ and other libraries on your system will pose an even bigger challenge. You won't be able to just install updated versions of some of those packages in the usual places without risk of breaking your system.

It is installed, please let me know how to check that is installed.

Checking my Fedora 8 machine, I find the following. /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi/XML/Parser.pm

I think that is the XML::Parser module for Perl. The "5.8.8" part will vary depending on which version of Perl you have on your computer.

BTW, are you aware that Fedora 10 just came out recently?

Hi,

Is it possible to cross compile gimp2.6.4? i am trying to cross compile gimp2.6.4 with arm-linux-gcc. Pleae let me know the procedure to do this.

Is there any toolchains required?

- Sanjeev More

-

Hi,

Thanks for your input. i downloaded gimp2.6.4, i configured this with some packages like(babl,gegl,glib....) and i did make and make install on fedora 10 host machine. This is working fine.

But i need gimp2.6.4 to be cross compiled with arm-linux-gcc. For this i need to cross compile all these packages(babl,gegl,glib...) and then gimp2.6.4 or just i need compile gimp2.6.4

-- Sanjeev

----- Original Message ---- From: "jcupitt@gmail.com"
To: sanju More
Cc: gimp-developer
Sent: Tuesday, 20 January, 2009 4:27:29 PM Subject: Re: [Gimp-developer] Gimp2.6.4 for ARM processor

2009/1/20 sanju More :

Is it possible to cross compile gimp2.6.4? i am trying to cross compile gimp2.6.4 with arm-linux-gcc. Pleae let me know the procedure to do this.

Is there any toolchains required?

I cross-compile from x86 linux to windows and I imagine it's pretty similar. You need to build the cross-compiler (perhaps you have this already?), then build the software stack that gimp depends upon, then build gimp.

Google suggests:

http://www.ailis.de/~k/archives/19-ARM-cross-compiling-howto.html

John

Hi,

Please tell me the procedure to cross compile all these.

My target board S3C2410.

-Sanjeev More

----- Original Message ---- From: Daniel Hornung
To: gimp-developer@lists.xcf.berkeley.edu Sent: Tuesday, 20 January, 2009 5:16:13 PM Subject: Re: [Gimp-developer] Gimp2.6.4 for ARM processor

On Tuesday 20 January 2009, sanju More wrote:

Hi,

Thanks for your input. i downloaded gimp2.6.4, i configured this with some packages like(babl,gegl,glib....) and i did make and make install on fedora 10 host machine. This is working fine.

But i need gimp2.6.4 to be cross compiled with arm-linux-gcc. For this i need to cross compile all these packages(babl,gegl,glib...) and then gimp2.6.4 or just i need compile gimp2.6.4

-- Sanjeev

You'll need to have all the dependencies available on the other platform as well, which probably means you'll have to cross-compile them.

Daniel

Hi,

i am trying to cross compile gegl-0.0.22 with command CC=arm-linux-gcc ./configure arm-linux --target=arm-linux --with-shared --prefix=/usr. I am getting below mentioned error. what is this error exactly configure: WARNING: you should use --build, --host, --target checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... gawk
checking whether make sets $(MAKE)... yes checking for arm-linux-gcc... arm-linux-gcc checking for C compiler default output file name... a.out checking whether the C compiler works... configure: error: cannot run C compiled programs. If you meant to cross compile, use `--host'. See `config.log' for more details.

i changed if test "$cross_compiling" = maybe; then cross_compiling=yes
to
if test "$cross_compiling" != maybe; then cross_compiling=yes

then i got below mentioned error

checking for GTK... yes checking for bind_textdomain_codeset... no configure: error:
*** Check for bind_textdomain_codeset() failed! This is required.

--Sanjeev

----- Original Message ---- From: Daniel Hornung
To: gimp-developer@lists.xcf.berkeley.edu Sent: Tuesday, 20 January, 2009 5:16:13 PM Subject: Re: [Gimp-developer] Gimp2.6.4 for ARM processor

On Tuesday 20 January 2009, sanju More wrote:

Hi,

Thanks for your input. i downloaded gimp2.6.4, i configured this with some packages like(babl,gegl,glib....) and i did make and make install on fedora 10 host machine. This is working fine.

But i need gimp2.6.4 to be cross compiled with arm-linux-gcc. For this i need to cross compile all these packages(babl,gegl,glib...) and then gimp2.6.4 or just i need compile gimp2.6.4

-- Sanjeev

You'll need to have all the dependencies available on the other platform as well, which probably means you'll have to cross-compile them.

Daniel

Hi,

You mean to say i have to use this CC=arm-linux-gcc ./configure arm-linux --host=arm-linux

--Sanjeev

----- Original Message ---- From: Tor Lillqvist
To: sanju More
Cc: daniel.hornung@gmx.de; gimp-developer@lists.xcf.berkeley.edu Sent: Wednesday, 21 January, 2009 12:22:54 AM Subject: Re: [Gimp-developer] Gimp2.6.4 for ARM processor

i am trying to cross compile gegl-0.0.22 with command CC=arm-linux-gcc ./configure arm-linux --target=arm-linux

When cross-compiling you should use --host, not --target, to specify the architecture the executables you are building will run on. --target is used when configuring compilers and similar tools, to specify the architecture of the object files the tools will operate on.

--tml